2 Speed Belt-Drive Turntable
Тип: полу-автоматичен
Мотор: 16-полюсен синхронизиран
Скорости: 33 и 45 об/мин
Настройка на скоростите: -3 до +7%
Сила на проследяване: 0 до 5г.
Цена: 300 лв.
Компактен, напълно автоматичен грамофон с директно задвижване.
Разполага с интегриран мотор с директно задвижване на платтер/ротор и динамично балансирано, линейно проследяващо рамо с оптоелектронен сензор и микрокомпютърно управление.
Шасито е конструирано с помощта на TNRC (Technics Non Resonant Compound).
Motor: ultra low speed brushless DC
Platter: 300mm aluminium die-cast
Speeds: 33.33 and 45rpmWow and flutter: 0.025% WRMS
Rumble: -78dB. Wow and flutter: 0.025%WRMS
Tonearm: Low mass linear tracking with gimbal suspension
Cartridge: plug-in connector, moving magnet stereo
Frequency response: 20 to 20,000Hz
Dimensions: 315 x 88 x 315mm
Weight: 4.4kg
Цена:270 лв.
CD204
Digital converter: 2 x TDA1540P
CD Mechanism: CDM-1
Frequency response: 20Hz to 20kHz
Signal to Noise Ratio: 90dB
Channel separation: 86dB
Total harmonic distortion: 0.005%
Line output: 2V
Dimensions: 420 x 92 x 300mm
Weight: 7kg
FA 141
Power output: 25 watts per channel into 8 oHm (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.09%
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 75dB (MM), 91dB (line)
Output: 150mV (line)
Speaker load impedance: 8 oHm
Dimensions: 420 x 300 x 79mm,Weight: 4kg
FP 146
Linear Tracking Turntable,
2-speed, belt-drive, automatic
Speeds: 33.3 and 45 rpm,
Stylus : Philips 22GP330,conical diamond
FT 144
Sensitivity: 0.9uV (FM), 140uV (MW), 140uV (LW)
Signal to Noise Ratio: 70dB (FM),Distortion: 0.45% (FM)
Selectivity: 70dB (FM), 55dB (MW), 55dB (LW)
FC 141
Dolby B noise reduction,Full-logic transport controls
За зъбни колела.
Цена:800 лв.
Lenco L 75
Drive: Idler drive
Motor: 4-pole synchronous with conical axis
Speeds: 78, 45, 33-?, 16-2/3
Wow and Flutter: ±0,08% / ±0,4%
Rumble: 36 dB (unweighted); 60 dB (weighted)
Mayware Formula IV Tonearm
Effective length: 224mm
Mounting distance: 209 to 215mm
Mounting hole: 25mm
Pivot friction: less than 5mg in any plane
Effective mass: low and variable
Pivot: inverted hardened steel pin pivoting on a jewelled bearing damped by viscous silicone fluid
Tracking force: 0 to 3g is achieved with a small cursor which slides along the calibrated aluminium tube.
Цена:1700 лв.