HIFI , HiEnd , Retro , Home Audio
The amp circuits is of the highest quality , featuring 16 MOS FETs
Power output: 110 watts per channel into 8 Ohms (stereo)
Frequency response: 1Hz to 300kHz
Total harmonic distortion: 0.008%
Damping factor: 200
Input sensitivity: 2mV (MM), 150mV (line)
Signal to noise ratio: 88dB (MM), 110dB (line)
Output: 150mV (line)
Speaker load impedance: 4 Ohms to 16 Ohms
Dimensions: 450 x 176 x 486mm
Weight: 35.1kg
Power Supply : AC100V 50 / 60Hz 350W
Цена: 3450 лв.
HiFi стерео приемник с лампов предусилвател.
Директно възпроизвеждане на MP3 от свързани USB памети и
USB твърди дискове/само във формат Fat 16/32/
24 битов D/A конвертор.
Качествен тороидален трансформатор.
Power output: 120 watts per channel
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.003%
Signal to noise ratio: 110dB (line)
Channel separation: 80dB (line)
Speaker load impedance: 4 Ohm to 16 Ohm
Digital inputs: coaxial, optical, USB
Dimensions: 430 x 130 x 340mm
Weight: 9.6kg
Year: 2013
Цена:270 лв.
Uniti съчетава вътрешностите на интегрирания усилвател Nait 5i на Naim и
CD5i CD плейър с различни допълнителни източници: FM/DAB tuner, iPod interface,
USB memory-stick interface, iRadio/UPnP interface. Line-level analog inputs:
5. S/PDIF digital inputs: 5. Digital formats supported: MP3, AAC, Apple Lossless,
WAV, FLAC, Ogg Vorbis, WMA, MP3.
60W per channel power output/8 Ohms/
Dimensions: 432mm/ W,87mm/H , 314mm/ D.
Weight: 11.3kg.
Цена:1200 лв.
Specifications:
CD
Analogue outputs:
4V RMS (XLR balanced)
2V RMS (RCA unbalanced)
Digital inputs
1 x AES, XLR
110 Ohms
2 x BNC 75 Ohms
2 x Optical ‘Toslink’
Digital outputs
1 x BNC
1 x RCA
1 x Optical
Communication
External remote control receiver input
RJ45 input ‘exlink’
RJ45 output ‘exlink’
Power consumption
35W with power on, 25W on stand-by
Size (W x D x H): 490 x 414 x 104mm
Weight: 20kg
Preamplifier
Inputs
Phono MM or MC by plug-in board
(XLR or RCA input sockets)
5 x line level inputs, 250mV
I x CD input, XLR balanced connector
Outputs
2 x XLR, balanced pre-out
1 x RCA, pre-out
1 x RCA, tape output
Communication
External remote control receiver input
12V trigger input
12V trigger output
RJ45 input ‘exlink’
RJ45 output ‘exlink’
Power consumption
35W with power on, 25W on stand-by
Size (W x D x H): 490 x 414 x 104mm
Weight: 20kg
Power amplifier
Power
300W into 8 Ohms @ 1kHz
600W into 4 Ohms @ 1kHz
Gain
24dB, unbalanced mode
Inputs (switchable)
1 x RCA unbalanced
1 x XLR balanced
Outputs
2 pairs of loudspeaker sockets for bi-wiring
Communication
12V trigger input
12V trigger output
RJ45 input ‘exlink’
RJ45 output ‘exlink’
Power consumption
500W @ full power into 8 Ohm load, <1W on stand-by
Size (W x D x H): 490 x 414 x 238mm
Weight: 35kg
Цена:15000 лв.
Проектиран от Дейвид Луис, Beolab 6000 е добър пример
за нетрадиционния подход на B&O.Доказателство за
способността на B&O да комбинира инженеринг и дизайн.
Вътрешният обем на алуминиевата тръба с височина
110 см и тегло 6,2 кг е само 3 литра.B&O отчита 55 до
20000Hz (IEC 268-3 и 268-5) като „ефективен“ отговор.
Auto Class A/до 10W при 8 ома/
Power output: 120 watts per channel into 8 ohm (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.005%
Damping factor: 90
Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 80dB (MC), 94dB (MM), 106dB (line)
Channel separation: 70dB (MM), 65dB (line)
Intermodulation Distortion at rated output: 0.002%
Output: 150mV (line)
Dimensions: 435 x 146 x 424.5mm
Weight: 13kg
Цена:1150 лв.
Колекционерски сет на британскта легенда.
Quad 303
Power output: 45 watts per channel into 8 ohms (stereo)
Frequency response: 30Hz to 35kHz
Total harmonic distortion: 0.1%
Input sensitivity: 0.5V
Signal to noise ratio: 100dB
Speaker load impedance: 4? to 16?
Dimensions: 120 x 159 x 324mm
Weight: 8.2kg
Quad 33
Frequency response: 30Hz to 20kHz
Total harmonic distortion: 0.02%
Input sensitivity: 2mV (MM), 100mV (ceramic), 100mV (line)
Signal to noise ratio: 70dB (MM), 85dB (line)
Output: 100mV (line), 0.5V (Pre out)
Dimensions: 260 x 92 x 165mm
Weight: 3kg
Quad FM3
FM Tuning Range: 88 to 108 MHz
Sensitivity: 2uV (FM)
Distortion: 0.2% (FM)
Selectivity: 46dB (FM)
Frequency response: 20Hz to 15kHz (FM)
Output: 100mV
Dimensions: 260 x 92 x 165mm
Weight: 2.7kg
Цена:2000 лв.
HiFi Система Kenwood
KA-3010
Power output:2 x 60 watts /8 ohms
52 watts per channel / 4 ohms
90 watts per channel /2 ohms
Frequency response: 20Hz to 70kHz
Total harmonic distortion: 0.08%
Damping factor: 200
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 86dB (MM), 106dB (line)
Dimensions: 440 x 103 x 345mm
Weight: 6.8kg
DP-1510
DAC:2 x PCM56P-L – SM5807EP
Transport:KSS-150A
Frequency response: 10Hz to 20kHz
Signal to Noise Ratio: 100dB
Channel separation: 96dB
Total harmonic distortion: 0.008%
Line output: 1.2V
Dimensions: 440 x 108 x 262mm
Weight: 3.8kg
KT-1020L
FM Tuning Range: 87.5 to 108 MHz
MW Tuning Range: 531 to 1602 kHz
LW Tuning Range: 153 to 281 kHz
Sensitivity: 0.6uV (FM), 13uV (MW), 22uV (LW)
Signal to Noise Ratio: 68dB (FM), 50dB (MW), 47dB (LW)
Distortion: 0.4% (FM), 0.5% (MW), 0.6% (LW)
Selectivity: 64dB (FM)
Frequency response: 30Hz to 15kHz (FM)
Output: 600mV (FM), 180mV (MW), 180mV (LW)
Dimensions: 440 x 78 x 267mm
Weight: 2.5kg
Цена:360 лв.
Regular and SQ Matrix decoder and rear channel amplifier
С QL-600A съществуваща стерео система може да бъде
разширена до куадро система, при което усилвателят
на мощността в QL-600A захранва задните високоговорители.
Damping Factor : 40 (8 ohm, 1kHz)
Music Power Output (IHF) : 44W (4 ohms);36W (8 ohms)
Power output: 10W/ch into 8 ohms(stereo)
Frequency response: 20Hz to 30kHz
Total harmonic distortion: 0.5%
Speaker load impedance: 4 ohm to 16 ohm
Pre Out: 1V, max. 3V
Bass: -11/+12 dB (at 100 Hz).
Treble: -10/+9.5 dB (at 10 kHz
Dimensions: 430 x 138 x 337 mm (WxHxD)
Weight: 8.1 kg
Цена:950 лв.
NAPV 145 -Два моноблока.
Frequency Response -3dB at 3Hz – 50kHz
80W (mono) output into 8 ohms
Custom-designed transformer providing 400VA of transient power.
SUPERCAP-Захранване за NAPV 145.
13 x 24V outputs, 2 x 12V output
All-new Discrete Regulator (DR) configuration, delivering Naim Audio’s
best-ever standards of stable, low-noise power
CDS3 CD Player.
Philips CD10 transport,24-bit – 8 times oversampling digital filter with HDCD
2 x Burr-Brown PCM 1704-K, 24-bit mono D to A converters. HDCD decoding is
only activated when playing encoded discs.
XPS-Захранване за CDS3.
Naim Audio XPS е изключително усъвършенствано захранване с шест отделно
регулирани изхода с много нисък шум, включващо огромен тороидален
трансформатор и шест регулатора на мощността.
SuperLine-Reference MC Phonostage.
AUDIO INPUTS
– Analogue Inputs: BNC, RCA
– Sensitivity: 100 microV to 500 microV
– SuperLine E: 200 microV to 1mV
– Other: 2 x 5-pin DIN loading plugs
AUDIO OUTPUTS
– Gain: 64dB at 1kHz, SuperLine E: 58dB at 1kHz
– Frequency Response: 10Hz to >200kHz -3dB
thd+n: <0.005% (500 microV @ 1kHz)
– S/N Ratio: 82dB ref 500 microV, 0 micro(A-weighted)
– SuperLine E: 78dB ref 500 microV, 0 micro (A-weighted)
– Crosstalk: >80dB (20Hz to 20kHz)
PHONO SPECIFIC
– RIAA Accuracy: ±0.1dB (20Hz-20kHz)
– High Pass Filter: 10Hz
– Input Overload: 5mV rms (1kHz)
– SuperLine E: 10mV rms (1kHz)
– Load: 10/1kOhm, 500/220/100Ohm
– Input Option:100pF, 1nF, 5.6nF, 10nF
NAC 202-Прeдусилвател.Audio inputs
Other inputs: AV input configurable for unity gain
Input impedance: 47 kOhm
Analog inputs: 4 x DIN, RCA
Input sensitivity: 75 mV
Audio outputs
Line outputs variable (level): 775 mV
Line outputs fixed (level): 75 mV, 600 Ohm
Load impedance: 10 kOhm (min.)
Output impedance: <50 Ohm
Analog: 2 x variable, 3 x line level
Power outputs: For Naim phono amplifier
Upgrades: 1 x HiCap/SuperCap
NAPSC-Захранване за NAC 202 и 282.
Naim NAPSC е съществена надстройка за NAC 202.
Naim Burndy SNAXO / SuperLine 17 Pin Interconnect.
Цена:22 000 лв.