Accuphase P-266 Power Amp
Continuous average power/20 Hz to 20 kHz, Distortion Factor 0.01%/
Stereo specification-Normal:200W/4 ohm/,130W/8 ohm/
Class-A: 55W/4 ohm/,30W/8 ohm/
Monaural specification /bridge connection/-Normal:400W /8 ohm/
Class-A: 110W /8 ohm/
Total harmonic distortion rate /20 Hz to 20 kHz 0.25W continuous average output/
Stereo : 0.01% /4 ohm Load),0.005% (8 ohm -16 ohm Load/
IM Distortion Factor (IHF) 0.003%
Frequency characteristic:20 Hz – 20 kHz + 0 -0.2 dB /Continuous Average Output, Level Control MAX/
0.5 Hz – 300 kHz + 0 -3dB (at 1W Output, Level Control MAX)
0.5 Hz – 150 kHz + 0 -3dB (Level Control -6dB at 1W Output)
Gain Stereo : 27.8 dB
Monaural specification : 33.7 dB
Load impedance Stereo specification : 2 ohm – 16 ohm
Monaural specification : 4 ohm-16 ohm
Damping factor Stereo specification : 120
Monaural specification : 60
Subsonic filter 17 Hz, -12dB/oct.
Output meter Logarithmic compression peak indication type, -40dB to + 3 dB and output direct reading scale
Semiconductor used Transistor – 34 , FET – 18, IC – 7
Diode : 68 Pieces,Opto-coupler : 2 pcs
External dimensions W/ H / D : 445/160 (Including Legs) /373 mm
Weight 20kg
Accuphase C-222
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.005%
Input sensitivity: 126mV (line)
Signal to noise ratio: 90dB (line)
Output: 8V (Pre out Max)
Dimensions: 445 x 128 x 373mm
Accuphase C-222 Preamp
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.005%
Input sensitivity: 126mV (line)
Signal to noise ratio: 90dB (line)
Output: 8V (Pre out Max)
Dimensions: 445 x 128 x 373mm
Цена:6200 лв.
